Every bar of cold process soap starts with lye. It does the transforming work, turning oils into soap, but it can also blind you, scar your skin or badly hurt a child who gets into it. This module is free and will always stay free, because nobody should make soap without it. You must pass its quiz at 100% before the rest of the course unlocks.
What you'll learn
- LO2.1 Identify the hazards of sodium hydroxide from its safety data sheet, including GHS classification and pictograms.
- LO2.2 Select and wear correct personal protective equipment for every stage of soapmaking.
- LO2.3 Mix a lye solution safely: lye into water, never the reverse, with ventilation and heat-safe containers.
- LO2.4 Give correct first aid for lye contact with skin, eyes and mouth, and know when to call Poison Control or 911.
- LO2.5 Contain and clean a lye spill, and store lye safely away from children, pets and acids.
- LO2.6 Set up a workspace with zones, surfaces and rules that keep children and pets out.
What sodium hydroxide is
"Lye" in this course always means sodium hydroxide (NaOH), also sold as caustic soda. Its CAS number, the universal ID that chemical databases use, is 1310-73-2 [S2][S3][S4]. It is a white, odourless solid that comes as beads, flakes or pellets [S2][S3]. One laboratory grade is more than 97% sodium hydroxide, with less than 3% sodium carbonate [S3]. Even a 5% solution has a pH of about 14, the top of the scale [S3].
Two properties matter every day:
- It is hygroscopic. It pulls moisture out of the air [S3]. It also absorbs carbon dioxide from the air and slowly turns into sodium carbonate [S4][S7]. An open container clumps and becomes less predictable to weigh, so keep it sealed.
- It reacts strongly with water, acids and many metals [S2][S3][S4]. Those reactions are behind most of the rules in this module.
Reading the label and safety data sheet
In Canadian workplaces, hazardous products are covered by WHMIS 2015, Canada's system aligned with the Globally Harmonized System (GHS) [S3][S11]. A WHMIS product comes with a supplier label and a safety data sheet (SDS) in 16 numbered sections [S3]. You don't need to memorize an SDS, but you do need to know where to look:
| SDS section | What you'll find |
|---|---|
| 2 Hazard identification | Hazard classes, signal word, hazard statements, pictograms |
| 4 First-aid measures | What to do for skin, eye, inhalation and swallowing |
| 6 Accidental release | How to contain and clean up a spill |
| 7 Handling and storage | Safe handling and storage conditions |
| 8 Exposure controls / PPE | Eye, hand and body protection |
| 10 Stability and reactivity | What it must not touch |
Here is how three Tier A sources classify sodium hydroxide:
| Hazard | CCOHS profile [S2] | Fisher Scientific, solid [S3] | ERCO Worldwide, 40–70% solution [S4] |
|---|---|---|---|
| Skin corrosion | Category 1 | Category 1A | Category 1A |
| Serious eye damage | Category 1 | Category 1 | Category 1 |
| Respiratory irritation (STOT single exposure) | not listed | Category 3 | Category 3 |
| Corrosive to metals | notes it may corrode metals | not listed | Category 1 |
| Acute toxicity, oral | not listed | not listed | Category 3 ("Toxic if swallowed") |
| Signal word | Danger | Danger | Danger |
All three share the core hazard statement: causes severe skin burns and eye damage [S2][S3][S4]. The supplier SDSs add may cause respiratory irritation [S3][S4]. Classifications differ with the product's form, its concentration and the supplier's own review, so always read the SDS for the exact product you bought.
Pictograms. The corrosion pictogram covers skin corrosion, serious eye damage and corrosion to metals [S10], so it appears on every WHMIS supplier label for sodium hydroxide. The exclamation mark covers respiratory irritation (STOT single exposure, Category 3) [S10], so a supplier that uses that class may show it as well.
Consumer products are labelled differently. Lye sold to the public as a drain opener falls under consumer chemical rules, not WHMIS, and usually comes without an SDS, though CCOHS recommends getting one [S11]. Buy pure sodium hydroxide from a soapmaking or chemical supplier, and download the SDS before your first batch.
Why lye is so dangerous
Sodium hydroxide is corrosive to every tissue it touches [S5].
- Skin. It causes pain, redness, blisters and burns, and it can leave permanent scars. Severe exposure can kill [S2]. Burns can be deep ulcers [S4].
- The pain comes late. Pain can be delayed by minutes to hours [S2] while the chemical keeps penetrating [S7] and doing damage until it is washed off [S4].
- Eyes. It causes severe burns and permanent damage, including blindness [S2][S3]. It can penetrate deep into the eye. Glaucoma and cataracts may develop later [S4].
- Swallowing. It burns the lips, tongue, throat and stomach, and it can be fatal [S2]. It can perforate the esophagus or stomach [S3].
- Breathing. It doesn't readily form a vapour, but its dust or mist can severely irritate the nose, throat and lungs [S2][S4].
Personal protective equipment
Eyes: chemical splash goggles, every time. Safety glasses protect against flying objects, not liquids. For splashes, CCOHS recommends goggles with indirect ventilation [S8]; OxyChem calls for close-fitting chemical splash goggles at any concentration [S5]. A face shield is optional, worn only over goggles, never instead of them [S2][S8].
Hands: chemical-resistant gloves. CCOHS lists butyl rubber, natural rubber, neoprene, nitrile, PVC and Viton for strong sodium hydroxide solutions [S2]; ERCO's SDS lists butyl, neoprene, nitrile, PVC and Viton [S4]. The catch: CCOHS says its recommendations do not apply to very thin gloves (0.3 mm or less) [S2], and Fisher Scientific rates neoprene gloves for splash protection only [S3]. So:
- Treat gloves 0.3 mm or thinner, including thin disposables, as splash protection only [S2][S3]. If one gets splashed, take it off at once, rinse your hand and put on a fresh glove.
- For heavier handling, such as cleanup or a spill, wear thicker reusable nitrile, neoprene or butyl gloves.
- Pick gloves long enough to reach well past the wrist, and wear your sleeves over the cuffs so splashes can't run inside [S5].
Body and feet. Wear long sleeves, long trousers and closed shoes [S20], plus a chemical-resistant apron [S2]. Caustic soda breaks down leather; clean or discard contaminated leather [S2][S5].
When to wear it. Put your PPE on before you open the lye container. Keep it on through mixing, soaping, moulding and cleanup [S20]. Raw soap batter and freshly traced soap are less caustic than lye solution but still caustic, so keep gloves on whenever you handle them [S20][S21].
| Stage | Goggles | Gloves | Sleeves, apron, closed shoes |
|---|---|---|---|
| Weighing dry lye | Yes | Yes | Yes |
| Mixing lye solution | Yes (a face shield over them is a bonus) | Yes | Yes |
| Combining with oils, blending to trace | Yes | Yes | Yes |
| Pouring and moulding | Yes | Yes | Yes |
| Cleaning tools and surfaces | Yes | Yes | Yes |
| Unmoulding and cutting fresh soap | Recommended | Yes | Recommended |
Scent oils
Fragrance goes in on batch day (Modules 8 and 9). One Academy rule covers it:
Lye courses (Cold Process, Hot Process, Liquid Soap). The chemical-splash goggles and chemical-resistant gloves you wear for lye meet this rule; keep them on when scent goes in. If you weigh scent before the lye work starts or after it is cleaned up, the rule above applies on its own.
You at the bench (house rule). If you are pregnant or breastfeeding, the course's cautious position is that someone else does the essential-oil and fragrance-oil steps, or you make the batch unscented; if you have epilepsy or asthma, ask a health care provider before you handle these oils. The official cautions the course relies on are written for people who use a product, not for people who make one, so this is a precaution of the course, not a rule from Health Canada [S359].
Mixing the lye solution safely
Lye into water, never water into lye
Always add lye slowly to cold water, never water to lye [S2][S4][S7]. Dissolving it gives off a great deal of heat [S4][S7]. Water poured onto a pile of lye overheats in one spot, frothing and spattering violently [S2][S4]; the solution can boil in spots and spurt [S6] and approach boiling [S6][S20]. The heat can even ignite nearby combustibles [S4], so keep paper towels and cloths clear.
Water temperature. CCOHS and ERCO both call for cold water to limit heat build-up [S2][S4]. An older OxyChem handbook prefers lukewarm water, because solid caustic added too fast to cold water without stirring can settle and dissolve unpredictably [S6]. This course uses cold or cool water, never hot, adds the lye gradually and stirs constantly. Soapmaking educators use distilled water [S20].
Fumes and ventilation
When lye first hits the water, a puff of steam carries fine caustic mist that irritates your airways [S2][S4]. Mix near an open window or under an exhaust fan [S16][S20]. Turn your head aside and lean back while you stir [S22]. If you feel irritation, move to fresh air [S3][S20].
Containers and tools
| Use | Avoid |
|---|---|
| Polypropylene (PP, resin code 5) [S5][S4][S19] | Aluminium: it reacts and releases flammable hydrogen gas [S2][S4][S7] |
| High-density polyethylene (HDPE, resin code 2) [S5][S19] | Zinc, tin and galvanised items: same hydrogen reaction [S4] |
| Stainless steel (304 or 316) [S5]. Check it for pitting before each session and retire a pitted pot: one manufacturer's SDS lists stainless steels among the metals lye solution may corrode [S4] | Copper, brass, bronze and lead [S5] |
| Heat-resistant, sturdy, clearly labelled | PET drink bottles (resin code 1), which sodium hydroxide attacks [S4][S19] |
| Glass. Lye attacks it: a laboratory glass maker says alkaline solutions attack all glasses and rates even borosilicate as only moderately resistant [S353], and a caustic soda maker specifies non-glass tubes for its flow meters [S5]. One soapmaking educator warns that etched glass may eventually shatter [S22]; the course does not rely on that single claim. One supplier still accepts heat-resistant glass [S20]. House rule: this course is stricter than that supplier and never mixes or stores lye in glass; use plastic or stainless |
Plastics such as polyethylene and polypropylene resist caustic soda only within their temperature limits [S5]. Choose thick, rigid containers, not thin food tubs.
Never mix lye with acids, including vinegar
Acids react violently with sodium hydroxide; CCOHS names acetic acid, the acid in vinegar, as incompatible [S2][S4], and neutralizing releases considerable heat [S5]. Keep vinegar, citric acid and acidic cleaners out of the lye zone. If a recipe uses citric acid, dissolve it in its own jug in the oils zone and blend it into the oils (Module 9); never add any acid to dry lye or lye solution.
The procedure
- Put on goggles, gloves, long sleeves, an apron and closed shoes.
- Open the window or start the fan. Clear the area of children, pets, food and clutter.
- Weigh the cold distilled water into your PP, HDPE or stainless mixing container.
- Weigh the lye into a separate dry container. Close the lye container straight away (it is hygroscopic) [S3].
- Add the lye to the water a little at a time, stirring constantly with a stainless or PP utensil [S4][S6]. Keep your face turned away from the plume.
- Stir until the solution is clear and no beads are left on the bottom.
- Label the container ("LYE SOLUTION, CORROSIVE") [S4] and set it to cool in a safe spot. Never leave it where a child or pet can reach it [S17].
First aid
Water is the first aid for lye. Speed matters more than anything else. Start flushing first, and if someone else is there, have them make the call while you rinse [S2][S9].
Skin. Take off contaminated clothing, shoes, jewellery and leather items [S2][S5], taking care not to spread the chemical onto yourself or anyone else [S9]. Brush dry beads off first with a gloved hand or a cloth [S9][S2]. Then flush with gently flowing water for at least 60 minutes [S2]. Lukewarm (tepid) water, about 16–38 °C (60–100 °F), keeps you rinsing longer without getting chilled [S9]. Don't interrupt the flushing. Have someone call the poison centre right away, and go to a hospital: CCOHS says treatment is urgently required and that flushing should continue on the way if that can be done safely [S2]. Sources disagree on how long to flush skin, from 15 minutes [S7] to 20 minutes [S4] to 60 minutes [S2]; Fisher gives 15 minutes for eyes and no time for skin [S3]. This course uses the longest, 60 minutes.
Eyes. Follow the box below. Keep the rinse water from running into the other eye [S2][S4]. CCOHS's lye profile says not to try removing contact lenses [S2], while its eyewash guidance says to remove them without interrupting the rinse [S9]; keep flushing and leave lenses to medical staff unless they rinse out. A lye splash in the eye needs immediate hospital care, so keep rinsing on the way [S2][S3].
Breathing. Move to fresh air [S2][S3] and get medical attention as soon as possible [S2]. If the person stops breathing or becomes unconscious, call 911 [S14][S15].
Swallowing. Rinse the mouth with water and spit it out. Do not make the person vomit [S4][S5][S14]. Never give anything by mouth to someone who is unconscious [S3][S4]. Some SDSs say to drink water [S3][S4]; the manufacturer's handbook says not to give fluids [S5]. Give nothing to drink unless the poison centre or 911 tells you to. Swallowed lye needs immediate hospital care [S2].
No vinegar, ever, on skin or eyes. OxyChem warns against any neutralizing solution, particularly in the eyes, unless a physician directs it [S5]. CCOHS explains that neutralizers delay flushing, give off heat and can cause further injury [S9], and educators agree vinegar can make a burn worse [S20][S21].
Who to call
| Situation | Call |
|---|---|
| Person unconscious, not breathing or having a seizure | 911 [S14][S15] |
| Lye in the eye, or lye swallowed | 911 for emergency care, while you keep flushing [S2][S3] |
| Skin contact (while you keep flushing) | Poison centre right away for advice [S16][S3], then hospital: CCOHS says treatment is urgently required [S2] |
| Any doubt about what to do | Poison centre [S16][S3] |
- National poison centre line: 1-844-POISON-X (1-844-764-7669). It routes you to your local poison centre from anywhere in Canada [S12][S15]. In Quebec, the Centre antipoison du Québec is 1-800-463-5060 [S12].
- British Columbia and Yukon (BC Drug and Poison Information Centre): 1-800-567-8911 or 604-682-5050, 24 hours a day [S13][S14][S15].
- Tell the poison centre or paramedics what the label says, and bring the container or SDS with you [S16][S3].
Spills
Dry beads or flakes. Keep everyone else out, and put on your PPE [S2]. Don't pour water on the spill, because water on solid lye generates heat and spatters [S4][S7]. Sweep or scoop it up with dry tools into a dry, labelled container, without raising dust [S2][S3]. Then wipe the area down with plenty of water [S2].
Lye solution. Contain the spill and soak it up with a non-reactive absorbent such as sand or vermiculite [S4][S2]. Scoop that into a labelled container, then wipe and rinse the area with lots of water [S2]. A final wipe with dilute vinegar is acceptable on hard surfaces only, and only once the bulk is gone [S4][S22]. Acid on concentrated lye gives off heat [S5].
Disposal. Don't pour lye down the drain or put it in the garbage unless your municipality says you can [S16][S3][S20]. In the Capital Regional District, the Hartland Depot takes household hazardous waste such as drain cleaner free from residents, in the original or a clearly labelled container, never mixed [S18].
Storage
- Keep lye tightly closed in its original, labelled container [S2][S3][S16].
- Store it somewhere cool and dry, because it pulls in moisture and carbon dioxide [S2][S4]. Avoid the cupboard under the sink, where a leak could reach it [S22].
- Keep it away from acids and metals [S2][S3].
- Lock it away, out of sight and out of reach of children and pets [S3][S4][S16][S17]. Child-resistant packaging is not child-proof [S16].
- Never put lye in a food or drink container [S16][S17], never reuse an empty lye container [S2][S16], and label every container of lye solution [S4].
Children and pets
In 2020, Canada's poison centres handled 215,589 cases, and more than a third involved a child aged five or younger [S12]. Lye solution is clear and colourless [S4], easy to mistake for water, and raw soap batter and fresh soap are still caustic [S21][S20].
- Keep children and pets out of the room for the whole session, from weighing the lye through cleanup [S21][S20].
- Never leave lye, lye solution or fresh soap unattended. Poisonings often happen in a moment of distraction [S14].
- Keep all chemical products in a locked cupboard, and post the poison centre number by your phone [S17].
Setting up your workspace
| Zone | What happens there | Set-up |
|---|---|---|
| Lye zone | Weighing and mixing lye | Next to a window or fan [S16], away from the edge of the counter and from walkways |
| Oils zone | Melting and weighing oils | Separate from the lye zone so containers can't be mixed up |
| Pour zone | Blending, pouring and moulding | Covered, easy-to-wipe surface |
| Water access | Sink with a clear path to it | Usable without opening doors or moving things |
- Water within seconds. Suppliers call for eyewash stations close to where caustic is handled [S3][S4]; at home, a sink with a clear path. Eyewash bottles are hard to use alone, so treat them as a backup only [S9].
- Phone in reach, with the poison centre number posted [S17].
- No distractions. Pick a time when you won't be interrupted [S21].
- Dedicated, labelled tools. Keep soapmaking tools separate from food tools, and keep lye away from food and drink [S3].
- Clean up in your PPE. Wipe down surfaces, wash your tools and then wash your hands [S3][S16][S20].
Scenario: putting it together
A drop of lye solution flicks into your eye under loose glasses. Go straight to the sink and flush with running water, eyelid held open, for at least 60 minutes [S2], and shout for someone to call 911 [S2][S13]. No vinegar [S5][S9]. Next time, wear indirect-vented splash goggles [S8].
Key terms
- Sodium hydroxide (NaOH, lye, caustic soda): the strong alkali used to make bar soap.
- SDS: a supplier's 16-section safety data sheet.
- Corrosion pictogram: WHMIS symbol for skin corrosion, serious eye damage and corrosion to metals.
- Indirect-vented splash goggles: goggles that seal against liquid splashes, unlike safety glasses.
Summary
- Sodium hydroxide causes severe skin burns and eye damage, painless at first; signal word "Danger", corrosion pictogram [S2][S3][S7][S10].
- Wear indirect-vented splash goggles, suitable gloves, long sleeves, an apron and closed shoes from weighing through cleanup [S8][S2][S20]. Goggles and nitrile gloves for scent oils too (Academy house rule).
- Add lye slowly to cold water, never the reverse. Use ventilation, and use PP, HDPE or stainless containers. Never use aluminium, zinc or tin, and never mix lye with acids [S2][S4][S5].
- For skin or eyes, flush with water for at least 60 minutes and go to hospital (call 911 for eyes). Never use vinegar on a person. Don't induce vomiting [S2][S5][S9].
- Call 911 for emergencies, or 1-844-POISON-X (in BC, 1-800-567-8911) for poison advice [S12][S13].
- Store lye locked, sealed, labelled and dry. Keep children and pets out while you work [S16][S17].