Hot Process Soapmaking
Cooking cold process soap to completion: methods, safety, texture and finishing for hobby and small-business makers.
Written for adult hobbyists through to small-business makers, aged 19 and older. Sources are cited in every module, and rules content is dated "as read on" the day it was checked. General information, not legal, medical or other expert advice.
In this course you learn to
- Explain hot process as the cold process reaction with heat applied after trace so that saponification finishes in the pot before moulding.
- Apply the Cold Process Soapmaking Course lye rules (protective equipment, lye into water, storage, children and pets, no aluminium, no glass for lye, dedicated tools) to a cook that runs for an hour or more.
- Choose a cooking vessel of a suitable material and size for each method, keeping the batter to half the vessel or less.
- Convert a cold process recipe to hot process, choosing a lye concentration within the course's hot process window.
- Run a cook by each method with the correct setting, lid, checks and timing.
- Recognise the cook stages from thick trace through edge gel and rising to full translucency, and the signs of overcooking.
- Add fragrance and essential oils only after the batter has cooled below the flash point on the supplier's safety data sheet.
- Explain why hot process soap is often rustic and what controls how fluid the cooked soap is.
- Mould hot soap safely, removing air pockets and finishing the top without bare hands.
- Diagnose volcanoes and boil-overs, seizing, separation, lye and liquid pockets, dry or chunky texture, scorching, air pockets and soft bars from symptoms and the cook log.
Start with the free modules
Modules 1 and 2, including the safety module are open to everyone. Read them in full, take the quizzes and decide whether the rest of the course is for you.
The safety module is never behind a paywall
Module 2, Lye, Heat and Steam Safety for Hot Process, is open to everyone, with no purchase, no account and nothing to accept. The safety quiz (Module 2) must be passed at 100% before the later modules open.
- Module 1Hot Process and Cold Process: What Changes
- Module 2Lye, Heat and Steam Safety for Hot Process
11 modules in 5 sections
1. Foundations
2 modules · Free
- Module 1Hot Process and Cold Process: What Changes
- Module 2Lye, Heat and Steam Safety for Hot Process
2. Recipe and Equipment
2 modules
- Module 3Equipment and Set-ups for the Cook
- Module 4Formulating for Hot Process: Water, Lye Concentration and Superfat
3. The Cook
2 modules
- Module 5Cook Methods: Slow Cooker, Oven and Double Boiler
- Module 6Cook Stages and Judging Completion
4. Finishing
3 modules
- Module 7After the Cook: Fragrance, Colour, Superfat Oil and Additives
- Module 8Getting a Smoother Texture
- Module 9Moulding, Cutting and Curing
5. Fixing and Selling
2 modules
- Module 10Troubleshooting Hot Process Soap
- Module 11Batch Records, Labelling and Selling
Quizzes, tests and a final exam
Certificate of Completion from Island Enchantments
When you have completed everything the course lists for its certificate, the course's certificate page creates your named certificate with its own ID, ready to print. It confirms that you have completed all 11 modules and the final examination of the Island Enchantments Academy course in Hot Process Soapmaking.
This certificate recognises completion of an Island Enchantments course. It is not a licence or a government approval, and it does not authorise the holder to sell cosmetics; Canadian sellers must meet Health Canada requirements. It says nothing about the safety or quality of any soap the holder makes, and it does not mean that Island Enchantments or Health Canada has reviewed the holder's recipes, labels or products.