Liquid Soapmaking
References
Sources
Every fact, figure and rule in the course carries one of these source IDs. Tier A: Government of Canada and provincial health services, CCOHS, international chemical safety cards, standards bodies (IFRA), manufacturer safety data sheets and technical data, PubChem and peer-reviewed literature. Tier B: established soapmaking educators and suppliers, for technique only, and laboratory price pages for prices only. Tier C: forums and blogs, never used alone (none is cited).
- S1 Island Enchantments Soap Calculator, live page text read only: covers "liquid soap with paste dilution"; lye types "NaOH (bar)", "KOH (liquid)", "Both (cream)"; purity field with the note "Purity is printed on the lye container. Most KOH is sold at about 90%"; classic recipe "Liquid soap paste"; oil table SAP values as g KOH per g oil; 1.403 KOH:NaOH ratio.
- S2 ICSC 0357 Potassium hydroxide (May 2010): white hygroscopic solid; contact with moisture or water may generate enough heat to ignite combustible materials; the solution is a strong base, reacts violently with acid, corrosive to aluminium, tin, lead and zinc producing hydrogen; very corrosive to eyes, skin and respiratory tract; GHS Danger, harmful if swallowed, causes severe skin burns and eye damage, may cause respiratory irritation; never pour water into it, add it slowly to water; skin: remove clothes, rinse at least 15 minutes, medical attention; ingestion: rinse mouth, do not induce vomiting; storage separated from food, strong acids and metals, original container, dry, well closed; prevent dispersion of dust.
- S3 NIOSH Pocket Guide to Chemical Hazards: Potassium hydroxide (page last reviewed 2019-10-30): ceiling REL 2 mg/m³; noncombustible solid that may react with water and other substances and generate enough heat to ignite combustible materials; heat generated on contact with water and carbon dioxide from air; incompatible with acids, water, wet metals; eye and skin burns; first aid irrigate eyes and flush skin immediately.
- S4 Laboratory Chemical Safety Summary: Sodium Hydroxide and Potassium Hydroxide (Prudent Practices in the Laboratory, NRC, 1995): KOH "somewhat more corrosive" than NaOH; hydroxide burns may not be immediately painful while penetration continues; dilute solutions also injure skin; severe eye damage, possibly blindness; dissolving in water highly exothermic, add caustics slowly to water with stirring, never add small amounts of water to the solid; solids absorb moisture and carbon dioxide from the air; splash goggles and impermeable gloves at all times; store cool, dry, separated from acids; eye irrigation at least 15 minutes.
- S5 OSH Answers Chemical Profile: Sodium Hydroxide: burns may not be immediately painful; skin contact: remove contaminated clothing and leather goods, blot or brush off chemical, flush with gently flowing water for at least 60 minutes, do not interrupt flushing, continue during transport to hospital if safe, treatment urgently required; eye contact: flush at least 60 minutes lifting the lids, do not delay for contact lenses; ingestion: rinse mouth, hospital; always add corrosives slowly to cold water; corrosive to aluminum alloys and carbon steel; store in the original labelled container, cool, dry, separate from incompatibles. CCOHS has no potassium hydroxide profile (re-checked 2026-11-12: the CCOHS chemical-profile index lists none and the potassium_hydroxide address returns not found; this page, modified 2026-10-20, re-read the same day and still gives at least 60 minutes for skin and eyes; the course applies this sodium hydroxide figure to potassium hydroxide because S4 says KOH is somewhat more corrosive).
- S6 News release: Canada launches new toll-free 1-844 POISON-X number for poison centres (2023-03-20): 1-844-764-7669 routes to the local poison centre; Quebec callers directed to the Centre antipoison du Québec 1-800-463-5060; in 2020 poison centres managed 215,589 cases, more than one-third involving a child aged 5 or under.
- S7 BC Drug and Poison Information Centre home page: 24-hour line 1-800-567-8911 or 604-682-5050; call 9-1-1 if someone is unconscious, having a seizure, has difficulty breathing or chest pain.
- S8 Use household chemicals safely: store tightly closed in original containers; keep out of sight and reach of children and pets; child-resistant does not mean child-proof; close the cap even when set down for a moment; never pour down the drain unless directed; never re-use empty containers; call a poison centre if someone may have been harmed.
- S9 Is Your Child Safe?: household chemical products among top causes of injury and death in children under 5; bad taste and odour do not keep children away; locked cupboard out of reach; keep in original containers; do not transfer or store chemical products in beverage containers; child-resistant is not child-proof; keep cosmetic products out of reach of children, some can be harmful to young children if swallowed.
- S10 Cooking safety: use a heat-resistant surface to cool cookware; keep young children and pets away; keep a working fire extinguisher in the kitchen and a pot cover nearby to smother flames; do not leave cooking appliances unattended, stay in the kitchen; unattended cooking is a leading cause of cooking fires; if you have to leave, turn off the heat first; spattering and boiling over of hot oil can cause severe burns; what to do in a fire (written for a deep fryer): use a kitchen fire extinguisher or cover it with a metal lid, get everyone to safety and then call 911 right away; never use water to put out an oil fire (fire section re-read 2026-11-12).
- S11 Burns and Electric Shock (Healthwise topic): thermal burns include steam and hot liquids; liquid scald: cool tap water 10 to 20 minutes, no ice; chemical burns: call the Poison Control Centre; dry powder brushed away before flushing for 20 minutes.
- S12 Burns and scalds (page last reviewed 2026-03-31): scalds come from hot liquids or steam; cool running water for 20 minutes as soon as possible; no creams, oils or butter; A&E for burns caused by chemicals.
- S13 Glass Types and Properties (technical data): alkaline solutions attack all glasses; borosilicate glass only moderately resistant.
- S14 Selection of stainless steels for handling sodium hydroxide (NaOH): types 304 and 316 resistant below 80 °C to any concentration up to the limit of solubility; stress corrosion cracking risk at higher temperatures, not an issue if service is limited to 95 °C. No potassium hydroxide data on the page.
- S15 Liquid soap: Tips for making: KOH must be the main alkali for a stable pourable liquid soap; diluted bar soap's viscosity is not stable; not a first soap, learn bar soap first; 1–3% superfat; avoid recipes that need neutralising with citric acid, borax or boric acid; neutralising unnecessary with a positive superfat; dissolve KOH in room-temperature water, not hot glycerin; glycerin optional, replace with an equal weight of water; heat batter to 70–85 °C (160–180 °F) to reach trace; small batches of 100–300 g fat; most liquid soap fully saponified within about two hours, often one; covered paste can sit; store paste in a closed jar; fragrance in the finished product at 0.5–1% to start, tested on a sample.
- S16 Liquid soap: Tips for diluting and thickening: honey-thick, foamer and dilute-then-thicken methods; about 50% oleic acid for thickening; far above 50% may revert to jelly; dilute with water only, never honey, aloe, milk, beer or liquids with sugars, starches or proteins; distilled or RO water preferred; judge thickness at room temperature; gradual dilution 1 part water to 2 parts paste then smaller additions; honey-thick about 30–40% pure soap, foamer about 10%, dilute-then-thicken from 15–20%; salt cuts lather and clarity and works in a narrow range; borax and sodium bicarbonate can make soap decompose and separate; no magnesium or Dead Sea salts; salt usually 0.2–2% by a salt curve in 0.2% steps on a 50–100 g sample, wait about an hour; grated NaOH bar soap 2–3%; formulas: pure soap = fat + KOH weights, pure soap % of paste, dilution water = pure soap × 100 ÷ target % − paste weight.
- S17 Liquid soap: Tips for designing good recipes: KOH weight is not the NaOH weight (1.403); commercial KOH 85–95% pure, assume about 90% if unknown; a calculator left at 100% hides a superfat; shortcut "adjusted superfat = desired − (100 − purity)"; 25% lye concentration common (3:1), 33% gives a firmer paste, below 20% makes trace harder; superfat no more than 3% because excess fat clouds and separates; palmitic, stearic and unsaponifiables cloud; castor 10–30% for clarity; oleic about 50%; no sugary, starchy or protein additives; self-preserving effect weakens with dilution; many preservatives fail at high pH; pump or squeeze packaging; dual lye not recommended for thickening.
- S18 Should you add preservative to liquid soap?: most makers do not preserve paste; less agreement on diluted soap; very few preservatives work at soap's high pH, the author knows only three (Suttocide A, Glydant Plus, Liquid Germall Plus, the last off-label); microbes migrate in liquid and growth often starts at container edges, lid, dip tube and pump; diluted soap roughly 20–40% pure soap against 70–90% for bars and paste; a preservative is insurance, not a substitute for sanitation; pump or squeeze bottles rather than open jars; challenge testing by a laboratory; the author does not sell products that need preservation; small batches, refrigerate, watch for changes.
- S19 Neutralizing and superfating liquid soap (A. Aaron, 2010-09-30): recipe at an 8% lye excess; pH meter recommended; target pH 8.7–9.7; borax buffer as a 33% solution at 3/4 oz per pound of paste; "controversy" over borax on broken skin and children under three; citric acid turns soap it touches back into free oils ("egg drop soup"); superfat after dilution with sulfated castor oil or glycerin. Taught only as "why we don't".
- S20 Testing for clarity and diluting your liquid soap paste (A. Aaron, 2010-09-30): after a 2–3 hour cook a glob of paste in 2–3 oz boiling distilled water; milky means keep cooking 30 minutes and retest; palm, shea or cocoa butter recipes will not test clear; do not boil the paste: it evaporates water, toughens the skin, and diluting soap boils over easily even with headroom; start dilution water at about 60% of paste weight and record each addition; cold water into a hot stoneware crock can crack it.
- S21 Citric acid and citrus juice in soap: citric acid reacts with lye to make potassium citrate, which chelates scum-forming metals; 10 g citric acid neutralizes 8.42 g KOH; without extra lye the acid raises the superfat; method 1 dissolve in about 2 times its weight of room-temperature water and blend into the oils.
- S22 Sodium or potassium citrate in soap: citrate chelates scum-forming metals; potassium citrate typically 1.6–4.8% of fat weight; no extra lye for citrate, only for citric acid or citrus juice; dissolve in about twice its weight of water and blend into the oils.
- S23 NaOH or KOH purity check: alkali loses purity by absorbing water and carbon dioxide, forming carbonate that does not saponify readily; a calculator at 100% builds in a hidden superfat; deliquescence; "dry bucket" storage with desiccant outside the alkali container.
- S24 Soap pH: cheap paper strips often read 2–3 units low; test at room temperature in a 1–10% pure-soap solution in distilled water; paste and diluted liquid soap are too concentrated to read accurately; pH alone cannot detect lye excess (a few tenths of a unit); properly made soap about pH 9.5–11.5 depending on fatty acids; pure oleate about 11.2, laurate 10.1, palmitate 10.7; acid decomposes soap into fatty acids, much of it no longer soap by the time pH falls 1–1.5 units.
- S25 Dual lye recipe: the KOH molecule is 1.403 times the weight of NaOH; dual lye used for cream, shave and some liquid soaps.
- S26 Cosmetic Ingredient Hotlist (page headed 2025): "Boric acid and its salts" (synonyms include borax, sodium borate, sodium tetraborate, potassium borate) restricted: (a) as a pH adjuster 0.1%; (b) other cosmetics 5% with the warnings "Do not use on broken or abraded skin, not to be used by children under three years of age"; "Alpha-hydroxy acids ... and their salts" (citric acid, sodium citrate) with conditions for products between 3% and 18% (and other bands) total mono-AHA equivalents; formaldehyde entry (non-aerosol products that release formaldehyde vapours 0.01%); no entry for potassium hydroxide, sodium hydroxide, phenoxyethanol or sodium chloride found by a script search of all 663 table rows.
- S27 Updated Draft Assessment: Boric Acid, its Salts and its Precursors (March 2025): proposed to meet CEPA paragraph 64(c), danger to human life or health; margins of exposure for some self-care products potentially inadequate; boric acid notified in cosmetics including soaps and cleansers; a draft, not a final decision.
- S28 Zapka CA, Campbell EJ, Maxwell SL, et al. Bacterial hand contamination and transfer after use of contaminated bulk-soap-refillable dispensers. Appl Environ Microbiol 2011;77(9):2898–2904 (abstract): about one in four public-restroom bulk-refill dispensers contaminated in earlier studies; in a school field study Gram-negative bacteria on hands rose 26-fold (1.42 log10 CFU per hand) after washing with soap from contaminated bulk-refill dispensers; sealed refills reduced them. Authors' employer makes sealed-refill dispensers (noted; used only for "contaminated liquid soap can carry bacteria to hands").
- S29 Buffet-Bataillon S, Rabier V, Bétrémieux P, et al. Outbreak of Serratia marcescens in a neonatal intensive care unit: contaminated unmedicated liquid soap and risk factors. J Hosp Infect 2009;72(1):17–22 (abstract): a bottle soap dispenser implicated as the reservoir; soap dispensers may be an unrecognised source of infection; "airless" dispensers suggested.
- S30 Consumer product recall: Castelbel Liquid Soap recalled due to microbial contamination (last updated 2024-11-20): possible Pseudomonas aeruginosa; little medical risk to healthy people, increased risk for people with certain health problems or weakened immune systems; the Food and Drugs Act prohibits selling cosmetics made with hazardous substances or under unsanitary conditions. Whether the product was a true soap is not stated.
- S31 Consumer product recall: Method Gel Hand Wash, Sweet Water (354 ml) recalled due to microbial contamination (2020-11-18): some products in the lot contaminated with Pseudomonas aeruginosa. A liquid hand wash, not stated to be a true soap.
- S32 Guidance Document: Classification of Products at the Cosmetic-Drug Interface: definitions of cosmetic and drug (Food and Drugs Act s. 2); representation (claims, explicit or implied, by words, pictures or symbols) is the key consideration, with composition and mode of action.
- S33 Guidance Document: Human-Use Antiseptic Drugs: claims can be implicit ("kills organism Y" where Y causes disease); personal domestic antiseptic skin cleansers fall under the Antiseptic Skin Cleansers monograph; log or percentage reduction claims need data; consumers encouraged to use plain soap and water.
- S34 Industry Guide for the labelling of cosmetics: net quantity declared by volume for a liquid, gas or viscous substance and by weight for a solid; net quantity and product identity in English and French on the principal display panel; Schedule names ("Aqua" or "Water/Eau"); rinse-off product definition; fragrance allergens disclosed above 0.01% in rinse-off and 0.001% in leave-on products, List 1 from 2026-04-12, List 2 from 2026-08-01 (new) and 2028-08-01 (existing). s. 8.3.8.1 (naming of grouped allergens): the group name given for a grouped entry must be used in the list of ingredients, required when the sum of the entry's substances exceeds 0.01% rinse-off or 0.001% leave-on; listing the individual substances as well is permitted, not mandatory. Appendix 1 List 2 names whole essential oils, e.g. Lavandula Angustifolia (Lavender) Oil and the lavandin oils ("Lavandula Oil/Extract" shall be indicated), the orange peel oils ("Citrus Aurantium Peel Oil"), Eucalyptus Globulus Leaf Oil ("Eucalyptus Globulus Oil"); re-read 2026-11-12.
- S35 Good Manufacturing Practices (GMPs) for Cosmetic Products: Food and Drugs Act s. 16 prohibits selling cosmetics made, prepared, preserved, packaged or stored under unsanitary conditions or that may cause injury; s. 18 prohibits making them under unsanitary conditions with intent to sell; Health Canada encourages GMPs (ISO 22716 endorsed); equipment free from contamination.
- S36 Notification of Cosmetics: Guide for Cosmetic Notifications: notify within 10 days after first sale; rinse-off examples include soap; function "Cleanser" includes soap; form-of-product table ("Liquid non-oily": non-oil based, low viscosity, can be poured; "Semi-solid gel"; "Solid - Cake": soap bar).
- S37 Commission Decision (EU) 2019/701 establishing a glossary of common ingredient names for cosmetic labelling (EUR-Lex HTML): entries Potassium Cocoate, Potassium Olivate, Potassium Castorate, Potassium Sunflowerseedate, Potassium Citrate, Potassium Hydroxide, Citric Acid, Glycerin, Aqua, Sodium Chloride, Phenoxyethanol, Ethylhexylglycerin. Used as an official cross-check of INCI spellings, not as Canadian law.
- S38 Potassium Hydroxide, product technical information (supplier's own product): "Purity: 91.1%"; INCI Potassium Hydroxide; CAS 1310-58-3; caustic, wear gloves and goggles. Used only as an example of a single stated purity; no supplier endorsed.
- S39 Potassium hydroxide, ACS reagent, ≥85%, pellets, product 221473 (manufacturer's specification): assay ≥85%; impurities ≤2.0% K2CO3, 10–15% water; pH about 13.5 (5.6 g/L); a separate reagent grade listed as "90%, flakes". Used only as an example of a minimum assay capped by a water range.
- S40 suttocide A preservative (manufacturer page): sodium hydroxymethylglycinate, 50% aqueous solution; suggested for liquid and bar soaps; effective pH 3.5–12.0; use 0.5–1.0%; chemistry type "with formaldehyde donor".
- S41 liquid germall plus preservative (manufacturer page): diazolidinyl urea, iodopropynyl butylcarbamate, propylene glycol; effective pH 3.0–8.0; use 0.1–0.5%; chemistry type "with formaldehyde donor".
- S42 Glydant Plus Liquid (manufacturer's store listing): INCI DMDM Hydantoin, Iodopropynyl Butylcarbamate; DMDMH range 64–72% (DMH plus formaldehyde solids); "low free formaldehyde".
- S43 euxyl pe 9010 preservative (manufacturer page): phenoxyethanol and ethylhexylglycerin; pH 3–12; use 0.5–1.0%; rinse-off "suitable"; "without formaldehyde donor".
- S44 Hot Stuff (Kevin Dunn): a four-oil soap at 33% lye held at constant temperature: saponification complete after a little more than an hour at 70 °C and after about two hours at 60 °C, still alkaline beyond four hours at 50 °C; about 90–95% of the NaOH unreacted at trace. NaOH soap; no KOH data.
- S45 PubChem compound properties via PUG REST: potassium hydroxide CID 14797 (56.106), sodium hydroxide CID 14798 (39.997), citric acid CID 311 (C6H8O7, 192.12), citric acid monohydrate CID 22230 (C6H10O8, 210.14).
- S46 International Chemical Safety Card ICSC 0554: Isopropyl alcohol: highly flammable; vapour/air mixtures explosive; no open flames or sparks; flash point 11.7 °C closed cup.
- S47 Allan D. Determining the accuracy of colorimetric pH testing compared to potentiometric methods (BCIT Environmental Public Health Journal, 2017; abstract): pH strips differed significantly from a calibrated meter (P = 0.0003); strips stained by coloured samples.
- S48 Guidance for the use of IFRA Standards, 51st Amendment (73 pages): s. 1.2 all fragranced consumer products are in scope except, among others, "aromatherapy applications"; s. 6.4 end uses not listed have not been reviewed and are not included in IFRA's risk management; Table 11 (p. 49) lists "Liquid soap" with bar soap, shampoo and body washes under Category 9, "Rinse off products with body and hand exposure"; Table 12 (alphabetical, p. 58) lists "Liquid soap | Category 9"; s. 7.14 (p. 67) the certificate of conformity does not replace a safety assessment, and where a raw material has its own IFRA Standard (e.g. a citrus essential oil) the supplier should not issue an IFRA certificate as such but communicate conformity in a different format.
- S49 ISO 11930:2019 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product (catalogue page abstract): procedure for interpreting preservation efficacy test data and/or a microbiological risk assessment (ISO 29621); test primarily for water-soluble or water-miscible products. No criteria read or quoted.
- S50 Preservative Efficacy Test for Cosmetic Products (published price HK$5,200 for ISO 11930, EP 5.1.3 or USP 51; organisms listed include Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Candida albicans, Aspergillus brasiliensis; readings to day 28). Prices only and a lay description; no criteria quoted.
- S51 Preservative Efficacy Challenge Test, published price US$227.29 (seen 2026-11-11). Price only.
- S52 Daily exchange rates (table for 2026-11-04 to 2026-11-10; 2026-11-10: US dollar 1.4181, Hong Kong dollar 0.1808).
- S53 Testing and Calibration Laboratories accreditation program (based on ISO/IEC 17025; ILAC MRA signatory).
- S54 OSH Answers: WHMIS Glossary A–G: flash point is the lowest temperature at which an ignition source causes a liquid's vapours to ignite, the lower the more easily it ignites; flammable liquids have a flash point of not more than 93 °C.
- S55 Household Hazardous Waste: HHW includes leftover household products marked flammable, corrosive, explosive or poisonous; accepted from residents at no charge at the Hartland Public Drop-off Depot; keep in the original container or clearly label it; never mix HHW products; unknown HHW to the yellow table; Garbage & Recycling Infoline 250.360.3030.
- S56 How to use a probe thermometer: infrared thermometers do not read internal temperatures; stir liquids first; wait at least 15 seconds; probe off the bottom and sides; ice-point calibration (crushed ice, just enough water; 0 °C / 32 °F).
- S57 Slow Cookers and Food Safety: slow cookers generally cook between 170 and 280 °F; keep the lid in place, removing it only to stir or check; most have two or more settings.
- S58 Electrical product safety: check for a recognised Canadian safety mark (CSA, cUL or cETL) before buying products that plug into an outlet; keep cords a safe distance from heat; unroll cords.
- S59 NEMI method summary, USGS NFM 6.4.3.C, pH (electrometric): temperature-compensating meter; calibration that brackets the expected pH, repeated before measuring; measurement is temperature-dependent; keep instrument, electrode and calibration records.
- S60 Natural Health Products monograph: Aromatherapy – Essential Oils (date modified 2026-02-05): ask a health care provider before use if you have epilepsy or asthma; contraindication "Do not use this product if you are pregnant or breastfeeding"; keep out of reach of children. Used only for the optional pregnancy wording (soap labels carry none of the monograph's lines). Also cited for the "You at the bench" house rule (Academy bundle 2, Q4) in Modules 2 and 8, as the official caution that is written for users: re-read in the browser 2026-11-12 for the Module 8 lesson lines (page dated 2025-07-25; subpopulation adults 18 years and older; contraindication pregnancy or breastfeeding; ask a health care provider before use with epilepsy or asthma); the monograph addresses people who use an authorized product and says nothing about people who make or handle the oils, so the bench rule is labelled a house rule.
- S61 Range and Wall Oven: Oven Temperature Fluctuation / Cycling On and Off (manufacturer support): ovens cycle on and off to hold an average set temperature; normal swing about +30 °F and −30 °F (60 °F total), varying by model, where it is measured, room temperature and door openings.
- S62 Cosmetic Regulations, C.R.C., c. 869 (current to 2026-10-19, last amended 2026-04-12): s. 2 "ingredient" includes colouring agents, botanicals, fragrance and flavour but not substances used in preparation that are not present in the final product as a result of the chemical process; ingredients listed in descending order of predominance by weight, those at 1% or less and colouring agents in any order after the rest; "parfum" for fragrance other than fragrance allergens. s. 21.4(4): a fragrance allergen must be listed if its concentration is greater than 0.01% in a rinse-off product or 0.001% in a leave-on product (re-read 2026-11-12).
- S63 Notification of Cosmetics: Common issues when submitting a notification: concentration = quantity of ingredient ÷ quantity of all ingredients × 100; products meant to be diluted reported at concentrations as sold; therapeutic claims in name, label, ads or website lead to redirection to another program; CNF must match the label (name and ingredients).
- S64 IFRA 52nd Amendment, End of Consultation Letter (31 August 2026, 16 pages): Notification "likely in the second or third week of January 2027"; under the revised furocoumarin Standard detergent products "remain subject to the 50 ppm limit applicable to rinse-off products".
- S65 Sandalwood oil (chemical safety summary): the draft assessment proposes that daily use in body lotions, massage oils for infants and children up to 8 and essential oils as body fragrance may harm health; proposes no health risk from cleaning products, sunscreen, acne medication, shampoo, facial moisturizer and aromatherapy; proposes adding sandalwood to the toxic substances list and the Cosmetic Ingredient Hotlist. Soap is not named.
- S66 OSH Answers: First Aid for Chemical Exposures: most sources recommend flushing skin or eyes for 15 or 20 minutes; first aid guidelines quoted: rinse eyes exposed to chemicals immediately with copious tap water for at least 15 minutes.
- S67 Essential oils (household hazards): eye exposures, rinse for at least 15 minutes with lukewarm water; call the Poison Centre for further advice; call 911 for difficulty breathing.
- S68 Safety Data Sheet: Potassium Hydroxide (revision 10, 18 December 2025; 9 pages): Danger; acute oral toxicity category 4, skin corrosion category 1A, serious eye damage category 1, STOT single exposure category 3 (respiratory system), corrosive to metals; harmful if swallowed, causes severe skin burns and eye damage, may cause respiratory irritation; eyes: rinse immediately for at least 15 minutes, also under the eyelids; do NOT induce vomiting; store locked up, container tightly closed; composition stated as 100% (a laboratory grade; not a purity statement for soapmaking KOH).
- S69 Antiseptic Skin Cleansers (Personal Domestic/Commercial Use) monograph (2024-08-28): market authorization (a DIN or NPN) for topical antiseptic hand products with listed medicinal ingredients; does not support log reduction claims such as "kills 99.9% of germs"; antiseptic hand cleansers are a second-line approach and not a substitute for plain soap and water.
- S70 Proposed updates to the Cosmetic Ingredient Hotlist: Prohibited and restricted ingredients (consultation document, date modified 2025-11-19; comments by February 17, 2026): proposes revising the entry "Symphytum spp., with the exception of Symphytum officinale" to remove the exception, because echimidine, a hepatotoxic alkaloid, has been detected in some S. officinale derivatives and S. officinale contains other carcinogenic pyrrolizidine alkaloids such as lasiocarpine; a proposal, not in force. The Hotlist in force (date modified 2025-08-13) still reads "Symphytum spp., with the exception of Symphytum officinale" (comfrey) [S26].
- S71 Symphyti radix (comfrey root): herbal medicinal product page (final EU herbal monograph on Symphytum officinale L., radix, EMA/HMPC/572846/2009 Corr 1; addendum to the assessment report EMA/HMPC/313662/2023, first published 11 March 2024; periodic review consultation 2022). Supporting evidence from a non-Canadian regulator that comfrey root's pyrrolizidine alkaloids are under review; medicinal, not cosmetic, context.
- S72 Monographie : Aromathérapie – Huiles essentielles (the French version of the aromatherapy monograph; dated 25 juillet 2025, page modified 2026-02-05): contraindication « Ne pas utiliser si vous êtes enceinte ou si vous allaitez »; consult a health care provider before use if you have epilepsy or asthma (« fournisseur de soins de santé » is one of the terms it offers). Used only for the French of the optional pregnancy wording.
- S73 SOR/2024-63, Regulations Amending Certain Regulations Concerning the Disclosure of Cosmetic Ingredients (Canada Gazette Part II, Vol. 158, No. 9, 24 April 2024): replaces s. 21.4(1) of the Cosmetic Regulations; incorporates by reference, on an ambulatory basis, the fragrance allergens in Annex III of the EU Cosmetic Products Regulation and the transition period set in that Annex; rinse-off threshold greater than 0.01%, leave-on greater than 0.001%; impact statement: transition to 31 July 2026 for new products placed on the market and 31 July 2028 for existing products. Cited as the Academy rule ALLERGEN-LIST-2-WHOLE-OILS cites it.
- S74 Commission Regulation (EU) 2023/1545 of 26 July 2023 amending Regulation (EC) No 1223/2009 as regards labelling of fragrance allergens in cosmetic products (OJ L 188, 27.7.2023): fragrance allergens labelled individually above 0.001% in leave-on and 0.01% in rinse-off products; the Lavandula hybrida oil/extract entry is to be indicated as "Lavandula Oil/ Extract" in the list of ingredients. The Annex that SOR/2024-63 incorporates by reference; cited as the Academy rule ALLERGEN-LIST-2-WHOLE-OILS cites it.
- S75 Safety with cooking equipment (home cooking fire safety; statistics for 2020–2024; no page date shown): if you have a cooking fire, get out, close the door behind you to help contain the fire and call 9-1-1 after you leave; if you try to fight the fire, be sure others are getting out and you have a clear way out; smother a small grease fire by sliding a lid over the pan, turn off the stovetop and leave the pan covered until it is completely cooled; for an oven fire, turn off the heat and keep the door closed; never throw water on the fire; if the fire does not go out, or you are not comfortable sliding a lid over the pan, get everyone out and call the fire department from outside. Read with S10 for the fire steps in Module 2.
- S76 Eye Injury: First Aid for Heat Burns (Healthwise; current as of 2022-10-12: any burn injury to the eye needs medical attention as soon as possible; flush the eye at once with cool water, in a sink or dishpan or under a running tap or shower, opening and closing the eyelids and moving the eye so all of it is rinsed; keep flushing for 30 minutes; afterwards dark glasses or a sterile or clean cover, no fluffy cotton; no pressure on or around the eye; do not pop blisters; call 9-1-1 if concerned about a burn to the eye, 8-1-1 for advice; hot oil, butter and wax are not named, so it is cited as a heat-burn source)
- S77 First aid for eye injuries (no page date shown; information provided by St John Ambulance Australia: for burns, open the eyelid gently and wash the eye with cold flowing water for 20 minutes, put an eye pad or light clean dressing over the injured eye only, and make sure an ambulance has been called; for any eye injury do not touch the eye or a contact lens, do not let the person rub it, do not remove a penetrating object, no pressure when bandaging)