Every bar you make is mostly oils and butters, transformed. Each brings its own blend of fatty acids, and those decide whether a bar is hard or soft, bubbly or creamy, gentle or stripping, long-lived or quick to spot. This module teaches you to read an oil the way a chemist does.
What you'll learn
- LO4.1 Classify common soaping oils by their dominant fatty acids and expected bar properties.
- LO4.2 Read a supplier specification sheet for SAP value, fatty acid profile and storage advice.
- LO4.3 Explain rancidity (oxidation) and how iodine value, storage and antioxidants affect shelf life.
- LO4.4 Choose oils for hardness, cleansing, conditioning and lather, and recognise allergen considerations such as nut oils.
Fats are triglycerides
Fats and oils are triglycerides: one glycerol backbone carrying three long-chain carboxylic acids called fatty acids [S77]. In saponification, lye frees those fatty acids as soap and releases the glycerol. Module 1 covers that reaction and the SAP value in depth; here you need only the fatty acids themselves.
Two numbers describe a fatty acid:
- Chain length, the number of carbon atoms (12 to 18 for most soaping acids).
- Double bonds. None means saturated; one means monounsaturated; two or more means polyunsaturated.
Saturated chains are straight and pack tightly, so they melt high. Each cis double bond bends the chain, hindering packing and lowering the melting point [S77]. That is why coconut is solid and olive liquid at room temperature.
Real oils are variable mixtures: Codex, the international food standard, allows olive oil anywhere from 55% to 83% oleic acid [S80]. Edible oils also carry small amounts of free fatty acids and unsaponifiable matter, substances lye cannot turn into soap [S80].
The eight soap fatty acids
| Fatty acid | Carbons : double bonds | Melting point of the acid | Rich sources | What it brings to soap |
|---|---|---|---|---|
| Lauric | 12:0 | 43.2 °C | Coconut, babassu | Hardness, strong cleansing, big bubbly lather |
| Myristic | 14:0 | 53.9 °C | Coconut, babassu | Hardness, cleansing, bubbly lather |
| Palmitic | 16:0 | 63.1 °C | Palm, lard, tallow, cocoa | Hardness, stable creamy lather |
| Stearic | 18:0 | 68.8 °C | Shea, cocoa, mango, tallow | Hardness, stable creamy lather |
| Ricinoleic | 18:1 plus a hydroxyl group | not in source table | Castor | Conditioning, boosts and stabilises lather |
| Oleic | 18:1 | 13.4 °C | Olive, high-oleic oils, avocado | Conditioning, mildness, good shelf life |
| Linoleic | 18:2 | −12 °C | Sunflower, rice bran, canola | Conditioning, but oxidizes readily |
| Linolenic | 18:3 | −11 °C | Canola | Conditioning, but oxidizes fastest |
Chain lengths and melting points: [S77]; ricinoleic acid's structure: [S83]; soap roles: [S86][S87].
What the chemistry says about performance:
- Chain length controls solubility and lather. Shorter saturated chains (coconut, palm kernel) make more soluble soaps that lather readily. Longer C16–C18 chains give a longer-lasting bar, but solubility and quick lather fall as chains lengthen [S78].
- Very short chains are a problem. Fatty acids of 10 carbons or fewer can smell and irritate skin [S78].
- Unsaturation brings mildness and risk. Unsaturated fatty acids raise solubility and moisturising ability, but their double bonds oxidize during saponification, curing and storage, causing off odours and discoloration [S78].
- Ricinoleic acid is unusual. It has 18 carbons, one double bond and a hydroxyl group on carbon 12 [S83], and makes up 90% of castor oil [S1]. Castor boosts lather by making soap dissolve more easily [S87].
How calculators turn fatty acids into bar qualities
The shop calculator [S1] and SoapCalc [S86] sum fatty acids into five "qualities":
- Hardness = lauric + myristic + palmitic + stearic
- Cleansing = lauric + myristic
- Conditioning = oleic + ricinoleic + linoleic + linolenic
- Bubbly = lauric + myristic + ricinoleic
- Creamy = palmitic + stearic + ricinoleic
Target ranges are hardness 29–54, cleansing 12–22, conditioning 44–69, bubbly 14–46, creamy 16–48, iodine 41–70 and INS 136–165 [S1][S86]. Iodine measures how unsaturated the oils are; a blend with a high iodine value gives a softer bar that turns rancid sooner. INS is defined by the calculator as SAP value minus iodine value [S1]. Treat all of these as guides: SoapCalc notes that a 100% olive bar falls outside several ranges yet is popular and mild after a long cure [S86], and the shop calculator says test batches decide [S1].
Profiles of the common soaping oils
The table gives each oil's main fatty acids and its NaOH SAP value (grams of sodium hydroxide per gram of oil) from the shop calculator, beside a second published table. Codex figures are midpoints of the standard's ranges, converted from mg KOH/g.
| Oil | Main fatty acids, % [S1] | Iodine [S1] | NaOH SAP, calculator [S1] | NaOH SAP, second table |
|---|---|---|---|---|
| Olive | oleic 69, palmitic 14, linoleic 12 | 85 | 0.1354 | 0.1354 Codex [S80] |
| Olive pomace | oleic 69, palmitic 14, linoleic 12 | 84 | 0.1340 | 0.1336 Codex [S80] |
| Coconut, 76 °F | lauric 48, myristic 19, palmitic 9 | 10 | 0.1832 | 0.1828 Codex [S80]; 0.1910 Voyageur [S85] |
| Coconut, 92 °F | as 76 °F | 3 | 0.1832 | 0.1828 Codex [S80] |
| Fractionated coconut | caprylic 54, capric 43 | 1 | 0.2316 | 0.2477 FNWL [S84] |
| Palm | palmitic 44, oleic 39, linoleic 10 | 53 | 0.1418 | 0.1422 Codex [S80] |
| Shea butter | oleic 48, stearic 40, linoleic 6 | 59 | 0.1276 | 0.1283 FNWL [S84], Voyageur [S85] |
| Cocoa butter | oleic 35, stearic 33, palmitic 28 | 37 | 0.1383 | 0.1381 Voyageur [S85] |
| Mango butter | oleic 45, stearic 42, palmitic 7 | 45 | 0.1361 | 0.1372 FNWL [S84] |
| Castor | ricinoleic 90 | 86 | 0.1283 | 0.1290 FNWL [S84] |
| Sweet almond | oleic 71, linoleic 18 | 99 | 0.1390 | 0.1371 Voyageur [S85] |
| Avocado | oleic 58, palmitic 20, linoleic 12 | 86 | 0.1326 | 0.1372 FNWL, organic grade; its refined and virgin avocado oils are about 0.132 and 0.134 [S84] |
| Sunflower | linoleic 70, oleic 16 | 133 | 0.1347 | 0.1361 Codex [S80] |
| High-oleic sunflower | oleic 83 | 83 | 0.1347 | 0.1340 Codex [S80] |
| Rice bran | oleic 38, linoleic 34, palmitic 22 | 100 | 0.1333 | 0.1354 FNWL [S84] |
| Canola | oleic 61, linoleic 21, linolenic 9 | 110 | 0.1326 | 0.1336 Codex [S80]; 0.1233 FNWL [S84] |
| High-oleic canola | oleic 74, linoleic 12, linolenic 4 | 96 | 0.1326 | 0.1336 Codex [S80] |
| Babassu | lauric 50, myristic 20 | 15 | 0.1746 | 0.1785 Codex [S80] |
| Lard | oleic 46, palmitic 28, stearic 13 | 57 | 0.1411 | 0.1408 Codex [S81] |
| Tallow, beef | oleic 36, palmitic 28, stearic 22 | 45 | 0.1426 | 0.1397 Codex [S81] |
| Beeswax | wax esters, not triglycerides | 10 | 0.0670 | 0.0681 JECFA [S82] |
Where tables differ by more than about 2% (coconut at Voyageur, fractionated coconut, avocado, canola at FNWL and Voyageur, babassu, tallow), the course records the difference. Natural oils vary between harvests and suppliers, and your superfat is the safety margin, so the calculator tells you to keep it above 1% [S1].
Olive and pomace. Olive is mostly oleic: mild, conditioning, low cleansing, with a slippery, low-bubble lather [S87]. High-olive bars start soft and need a longer cure [S86][S87]. Pomace oil is solvent-extracted from olive pomace, then refined [S80]; its calculator profile is nearly identical to olive [S1].
Coconut: 76 °F, 92 °F and fractionated. Coconut is the classic lauric oil: hard, white, highly cleansing, with big bubbles; high amounts can be drying [S86][S87]. The 76 °F grade begins to melt at 24 °C and the 92 °F grade at 33 °C; warm-climate makers prefer 92 °F because it stays solid [S88]. The calculator gives both the same SAP and profile; the 92 °F grade's lower iodine value (3 versus 10) means fewer double bonds [S1], consistent with hydrogenation, which removes double bonds to make solid fats [S77].
Fractionated coconut is a poor soap oil. It is mostly caprylic (C8) and capric (C10) acids with almost no lauric or myristic [S1]. The solid portion has been removed, so it is always liquid [S89]. Acids this short can smell and irritate [S78], and educators report a soft, mushy bar [S88][S89]. The calculator scores its hardness at 100 because C8 and C10 are saturated [S1]; trust the published experience over that score. Its SAP is unusually high and the tables disagree (0.2316 versus 0.2477) [S1][S84]. Keep it for leave-on products [S88].
Palm, and the sustainability question. Palm oil comes from the fruit flesh; palm kernel oil, a lauric oil, from the seed [S80]. Palm gives a hard, long-lasting bar with mild, stable lather [S87]. IUCN reports that oil palm expansion has driven deforestation affecting at least 193 threatened species, but also that palm yields up to nine times more oil per unit area than other oil crops, so replacing it can move the damage elsewhere [S102]. Never overstate your choice on a label (Module 19).
Shea, cocoa and mango butters. All three are rich in stearic and oleic acids (cocoa also in palmitic) [S1]. They add hardness and a stable, lotion-like lather; a common range is 5–15%, occasionally up to 20% [S87].
Castor. Castor's ricinoleic acid boosts lather [S87]. Typical use is 5–10% [S87]; SoapCalc suggests 5–8% for more lather without extra cleansing [S86].
Liquid oils: sweet almond, avocado, sunflower, rice bran, canola. These are often used at 5–12% as partial substitutes for olive [S87]. Watch the linoleic and linolenic content. Ordinary sunflower is 70% linoleic with iodine 133; high-oleic sunflower is 83% oleic with iodine 83 [S1]. Codex sets their linoleic ranges at 48.3–74.0% and 2.1–17% [S80]. Educators recommend high-oleic sunflower for longer shelf life [S87].
Canola, a Canadian oil. Canola was developed in Canada by plant breeding in the 1960s and 1970s and must contain less than 2% erucic acid [S103]; Codex lists it as low-erucic rapeseed oil [S80]. Regular canola has 9% linolenic acid and iodine 110 [S1], so it is prone to rancidity; the Canola Council calls high-oleic canola more stable than regular canola [S103], and the calculator lists it at 74% oleic and only 4% linolenic acid [S1]. Two supplier charts list canola near 173–175 mg KOH/g [S84][S85], well below the calculator (186) and Codex (182–193) [S1][S80]. Those figures fall in Codex's range for ordinary high-erucic rapeseed (168–181) [S80], so they may describe a different oil. This course uses the calculator and Codex values.
Babassu. Babassu comes from the kernel of the Orbignya palm [S80]. It is about 50% lauric and 20% myristic [S1]: similar to coconut, a bit milder, typically 15–30% [S87].
Lard and tallow. Lard is rendered pig fat; edible tallow is rendered beef or sheep fat [S81]. Both give hard, white bars with creamy, stable lather [S87]. Tallow's Codex SAP range is wide (190–202 mg KOH/g) and the calculator's 0.200 sits near the top [S81][S1].
Beeswax. Beeswax is not a triglyceride. It is mostly wax esters of very long-chain alcohols (35–45%), hydrocarbons (12–16%) and free fatty acids (12–14%), melting at 62–65 °C, with a SAP value of only 87–104 mg KOH/g [S82]. The calculator lists no fatty acid profile for it [S1]. Much of it cannot become soap: the long-chain alcohols and hydrocarbons stay in the bar as unsaponifiables.
Reading a supplier specification sheet
A specification sheet sets the tests and limits a material must meet; a certificate of analysis (CoA) gives one lot's actual results against that specification [S72]. Module 19 covers filing them. Here is a fictional example for one lot of refined olive oil:
| Test | Specification | This lot (CoA) |
|---|---|---|
| Saponification value | 184–196 mg KOH/g | 191.5 |
| Iodine value | 75–94 | 84 |
| Acid value | ≤ 0.6 mg KOH/g | 0.2 |
| Peroxide value | ≤ 10 meq O₂/kg | 3.1 |
| Unsaponifiable matter | ≤ 30 g/kg | 11 |
| Oleic / linoleic acid | 55–83% / 3.5–21% | 72% / 9% |
| Storage | Cool, dark, tightly closed |
The limits mirror the Codex olive standard [S80]. Line by line:
- Saponification value is in mg KOH per gram. For g NaOH per gram, divide by 1,000, then by 1.403 [S1][S84].
- Iodine value measures unsaturation [S1]: higher means softer soap and faster rancidity.
- Acid value measures free fatty acids. Codex pairs 3.3% acidity (as oleic) with an acid value of 6.6, and caps refined oils at 0.6 mg KOH/g and cold-pressed or virgin oils at 4.0 [S80]. A high figure suggests breakdown has begun. The SAP value already counts free acids: for beeswax, acid value 17–24 plus ester value 72–79 roughly equals its SAP range, 87–104 [S82].
- Peroxide value measures early oxidation products [S90]. Codex caps refined oils at 10 meq active oxygen/kg and cold-pressed or virgin oils at 15 [S80].
- Unsaponifiable matter will not become soap: up to 15 g/kg for virgin olive, 30 g/kg for pomace [S80].
- Storage advice, also in SDS section 7: olive oil dry, cool, well ventilated [S98]; coconut oil tightly closed [S99].
Rancidity and dreaded orange spots
Rancidity here means oxidation. Oxygen attacks unsaturated fatty acids, and the breakdown products, mainly volatile aldehydes and ketones, smell rancid [S79]. Heat, light and transition metals such as iron start and speed the reaction [S79]. Susceptibility rises exponentially with the number of double bonds, because hydrogens between two double bonds are about 20 times easier to remove than those beside one [S79]. So linolenic oxidizes faster than linoleic, and both far faster than oleic.
That is why the iodine value predicts shelf life [S1]. SoapCalc treats blend iodine above about 90 as a shelf-life concern [S86]. A common rule of thumb keeps linoleic plus linolenic at or below 15%, though one reference that uses it admits it lacks a strong scientific basis [S91].
Dreaded orange spots (DOS) are orange patches of oxidation on cured soap. In a supplier chemist's accelerated tests, oxygen and dissolved calcium and iron sped the colour change, and olive-oil soap spotted much sooner than coconut-oil soap [S92]. Metal contamination, high free fatty acids and polyunsaturated oils are also named as triggers [S91]. Module 15 covers diagnosis and fixes.
Storage and stock rotation.
- Buy fresh, in amounts you will use soon, and check the CoA's peroxide and acid values.
- Keep fats cool, dark and tightly sealed, with little air in the container; refrigerate short-lived oils [S91][S98][S99].
- Opened bottles are the weak point: opened refined rapeseed oil with a canola-like profile held a low peroxide value for five months at room temperature, then rose about fivefold in month six [S90].
- Use the oldest stock first; label each container with its lot and opening date.
- Keep oils away from copper and iron, and use distilled water in soap [S91][S92].
Antioxidants. Oils contain natural antioxidants called tocopherols (vitamin E compounds); refined rapeseed oil had about 700 mg/kg [S90]. Rosemary extract (sold to soapmakers as rosemary oleoresin extract, ROE) delayed oxidation of that opened oil, best at 50–200 mg/kg, and slowed loss of the oil's own tocopherols [S90]. In soap, 0.1% ROE of oil weight delayed orange colour in accelerated tests [S92]. Be careful with claims: antioxidants slow oxidation, they do not reverse it, and extracts vary in strength [S90]. Add them soon after opening a fresh oil [S91], never as a rescue for oil that already smells off.
Allergens, labels and animal fats
Tree nuts. Health Canada's priority tree nuts include almonds, Brazil nuts, cashews, hazelnuts, macadamias, pecans, pine nuts, pistachios and walnuts. It lists unrefined or partially refined tree nut oils among foods containing tree nuts, and cosmetics and massage oils among non-food sources [S93]. Food Allergy Canada names soap and lotions too [S94]. So sweet almond oil is a tree nut ingredient.
Shea is not on Health Canada's list [S93]. Allergies Québec says shea's low protein would reduce its allergenic potential, but still advises people with nut allergies to be cautious with shea butter [S95]. Never call shea "nut-free"; list it clearly and let customers decide with their allergist.
Coconut is not a tree nut for Canadian allergen labelling, but some people react to it [S93][S94].
Label names let an allergic customer find these oils: Prunus Amygdalus Dulcis Oil or Sodium Sweet Almondate (almond), Butyrospermum Parkii Butter or Sodium Shea Butterate (shea), Cocos Nucifera Oil or Sodium Cocoate (coconut) [S52]. Module 18 covers ingredient lists.
Animal fats and vegan claims. Lard and tallow appear as Sodium Lardate and Sodium Tallowate when saponified [S52], or Adeps Suillus and Adeps Bovis, and beeswax as Cera Alba [S34]. A "vegan" claim must be true [S48]; Module 19 covers claims.
Choosing oils for a target
Start from the bar you want, then pick oils by fatty acid: butters, palm or animal fats for hardness and creamy lather; coconut or babassu, kept moderate because they can strip skin oils, for cleansing and bubbles [S86]; oleic-rich oils, preferably high-oleic versions, for mildness with shelf life [S87]; and a little castor for lather [S86][S87].
Key terms
- Triglyceride: glycerol joined to three fatty acids.
- Saturated / unsaturated: a fatty acid with no double bonds / with one or more.
- Iodine value: a measure of unsaturation.
- Specification sheet / CoA: the agreed tests and limits / one lot's results against them.
- Acid value / peroxide value: free fatty acids / early oxidation products.
- Unsaponifiables: substances in a fat that lye cannot turn into soap.
- Rancidity (oxidation): oxygen breaking unsaturated fatty acids into off-smelling compounds.
- DOS: dreaded orange spots, oxidation patches on cured soap.
- ROE: rosemary oleoresin extract, a plant antioxidant.
Summary
- Chain length and double bonds decide melting, solubility, lather, mildness and shelf life.
- Lauric and myristic: hardness, cleansing, bubbles. Palmitic and stearic: hardness, creamy lather. Ricinoleic: lather. Oleic: conditioning with good shelf life. Linoleic and linolenic: conditioning, but fast oxidation.
- SAP values differ between tables and lots. Use your CoA, convert mg KOH/g by dividing by 1,000 then 1.403, and keep a superfat margin.
- Store oils cool, dark and sealed, use the oldest first, and add antioxidants early.
- Sweet almond is a tree nut; label shea honestly; use INCI names.
- Never leave melting fats unattended, never use water on an oil fire, never dry oily towels in a dryer.
- Recalculate the lye whenever you change an oil.