Island Enchantments Academy · Free: Foundations and Hot Process Safety
Hot Process Soapmaking
Cooking cold process soap to completion: methods, safety, texture and finishing for hobby and small-business makers
2 modules
Free: Modules 1 and 2, in full. No purchase, no account and nothing to accept. Module 2, Lye, Heat and Steam Safety for Hot Process, is never behind a paywall or a sign-up; it carries the emergency first aid for lye and hot batter on skin and in the eyes, swallowing, steam scalds and fire, and the poison centre numbers.
Progress is saved in this browser.
Section 1 · Modules 1–2
Foundations
Module 1
Free
Learning outcomes
- LO1.1 Explain hot process as the cold process reaction with heat applied after trace so that saponification finishes in the pot before moulding.
- LO1.2 Compare hot and cold process for timing of saponification, water, texture, design, fragrance and superfat timing, cure and records.
- LO1.3 Identify what carries over unchanged from the Cold Process Soapmaking Course: the lye calculation, the 1% superfat floor, the safety rules, the discard rules and the regulatory duties.
- LO1.4 Explain why cooked soap is not automatically milder or safe to use, and why this course never uses the zap test.
- LO1.5 Decide when hot process suits a product and when cold process is the better choice.
Module 2
FreeSafety quiz 100%
Learning outcomes
- LO2.1 Apply the Cold Process Soapmaking Course lye rules (protective equipment, lye into water, storage, children and pets, no aluminium, no glass for lye, dedicated tools) to a cook that runs for an hour or more.
- LO2.2 Identify the hazards the cook adds: hot caustic batter, steam and hot condensate, rising and boiling-over batter, hot vessels and lids, a double boiler boiling dry, oven and stovetop fire, cords and alcohol near heat.
- LO2.3 Give correct first aid for hot batter on skin or in the eyes (the lye protocol: flush 60 minutes, poison centre, hospital), for scent oil alone in the eye, and for a steam or water scald.
- LO2.4 Follow the house rules for hot process: half-full limit, attended cook, no alcohol near heat, fragrance below its flash point, dedicated equipment, no zap test, and goggles and gloves for scent oils and hot oils.
- LO2.5 Set up, run and shut down a hot process workspace, including what to do when interrupted or when the power fails.